Rinse and repeat

Ok, sand and repeat. I sanded the filler primer and exposed too much bare metal. Worse than that I missed a huge crease where the door was opened too far at one time. Very typical on old cars, my 51 Willys had the same damage and has it again.

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1960.jpg

At bit more filler takes care of that. A bit more touch up here and there and more epoxy primer followed by filler primer. Sprayed the fender too because I knew I would have extra mixed. It is not really ready but enough along to spray it anyway. Better than wasting expensive product.

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1955.jpg

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1959.jpg

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1961.jpg

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1958.jpg

/home/wpcom/public_html/wp-content/blogs.dir/519/72972852/files/2014/12/img_1956.jpg

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s